Amped Wireless ACA1 Guide de l'utilisateur télécharger pdf (Page 37)

ACA1

USER’S GUIDE

The Activity LED does not come on and nothing happens when the adapter is plugged in.

a. If the LED is not on, this means the adapter does not have power or is installed incorrectly. Verify that

the adapter is firmly inserted into your USB drive and try to scan for networks again.

b. Unplug the USB adapter from the USB port and plug it back in firmly. Re-scan for wireless networks.

c. (Mac Solution) You may need to activate your wireless adapter. Click the Apple icon, select System

Preferences, then click on Network. Highlight the adapter titled Ethernet Adaptor (en#) for OS X 10.5

and below and click Advanced, then click Apply. For OS X 10.6, select the adapter titled Amped Adapter

and click Apply. Try to scan for networks again.

d. (Windows Solution) The wireless adapter may be disabled. Go to the Start menu, select Control Panel.

Then select Device Manager and locate the Amped Wireless adapter under the Network Adapters

category. Right click the Amped Wireless adapter and check to see if it is disabled. If disabled, enable

the adapter and try to scan for networks again. If there is a problem with the driver, it will also be

displayed here. Check solution (e) to solve this issue.

e. Uninstall the software by clicking Start, then select Control Panel, then select Programs. Find the

Amped Wireless program and uninstall it. Once fully uninstalled, remove the adapter from your USB

port, reinstall the Amped Wireless software using the supplied instructions and try again.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 49 50

Pas de commentaire

Amped Wireless ACA1 Guide de l'utilisateur Page 37