Amped Wireless AP300 Guide de l'utilisateur télécharger pdf (Page 38)

AP300

USER’S GUIDE

Troubleshooting

The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b) etc…

I entered setup.ampedwireless.com and it failed to open the Web Menu.

a. Make sure your computer is connected to the Smart Access Point wirelessly and NOT using a network

cable. Ensure the power is plugged in and on. Try to access the setup menu again.

b. Enter the following web address into your web browser instead of ‘setup.ampedwireless.com’:

http://192.168.1.240

c. Power off (unplug the power adapter) the Smart Access Point and power it back on. Try again.

d. Try to open your web browser to the default IP address by putting this number into your web browser

instead: 192.168.1.240

e. Reset your Smart Access Point to default settings by holding the Reset Button (located on the back

panel) for ten (10) seconds and try again.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 48 49

Pas de commentaire

Amped Wireless AP300 Guide de l'utilisateur Page 38